Universal Programmer AP8000 V2
Universal Programmer AP8000 V2

Universal Programmer AP8000 V2

Summary:The AP8000 V2 is Acroview’s new-generation universal programming system. It inherits the outstanding strengths of the industry benchmark AP8000, including broad chip compatibility, ultra-high programming speed and exceptional reliability. Adopting an FPGA chipset-based architecture, it delivers high-speed I/O and high-precision voltage parameters. With a clock frequency up to 200 MHz, it provides high-speed programming solutions for all programmable devices.

Other:

• The industry’s first universal programmer equipped with 10Gbps (10 Gigabit) Ethernet port, supporting a maximum programming speed of 400MB/s. 

• Fully compatible with the AP8000 platform and supporting software (One Platform for All). 

• Supports both chip-level and board-level programming simultaneously.
• Supports programming of all types of chips, including UFS and eMMC. 

• Supports asynchronous programming and enables simultaneous programming of different chip models.


AP8000V2

AP8000v2烧录器


UNIVERSAL

     PROGRAMMER

           通用型烧录器



The AP8000 V2 is Acroview’s new-generation universal programming system. It inherits the outstanding strengths of the industry benchmark AP8000, including broad chip compatibility, ultra-high programming speed and exceptional reliability. Adopting an FPGA chipset-based architecture, it delivers high-speed I/O and high-precision voltage parameters. With a clock frequency up to 200 MHz, it provides high-speed programming solutions for all programmable devices.




pic2.png


特色功能

  • The world’s first universal programmer with 10Gbps 10-Gigabit Ethernet communication.

  • Ultra-fast and ultra-compact universal programmer supporting a wide range of devices.

  • Flash, MCU, UFS, eMMC, SSD, CPLD, FPGA, PMIC and other programmable devices.

  • Digital I/O clock frequency up to 200 MHz.

  • Built-in optional high-capacity storage: 256GB / 512GB / 1TB, with a bandwidth of 2GB/s.

  • 1GB programming cache delivering 12.8GB/s bandwidth.

  • Maximum programming speed up to 400MB/s (HS400 mode supported for eMMC).

  • Flexible socket card design, supporting both offline and in-circuit programming.

  • High-speed data transfer via USB 3.2 Gen1 and dual 10Gbps Ethernet ports.

  • Backward compatible with AP8000 and AP8000H.

  • Supports low-power devices with 0.8V Vcc.

  • Asynchronous programming supported.

  • Single unit enables simultaneous programming of multiple chips.

  • Supports multi-unit cascading to achieve combined programming with pipeline throughput.

  • Integrated secure programming functions.



ModelAP8000V2
Communication InterfaceUSB 3.2 Gen1 / Dual 10Gbps Ethernet Ports (Cascading Supported)
High-capacity high-speed local data storageOptional capacities:256GB / 512GB / 1TB; bandwidth up to 2GB/s
High-speed data cache (Cache)Capacity: 2GB, bandwidth up to 12.8GB/s
Signal Rate≥200MHz
Number of Programming SignalsSG8000V2-H:208个((10+8*2)*8)
SG8000V2:104个((10+8*2)*4)
Programming SpeedUp to 400MB/s (eMMC HS400); higher programming speeds available for UFS.
Synchronous / Asynchronous ModesSupports both synchronous and asynchronous programming modes.
Supports various chip packagesIdentical to the SG8000 platform, supporting all chip package types.
Number of Parallel Programming Channels (Per Unit)SG8000V2-H:Gang8/Gang16
SG8000V2:Gang4/Gang8
Flexible Networking TopologiesCascading (Max. 32 Units), Star Topology, Mixed Topology
Programming Power SupplyMax total power per unit: 36W
Three independent programming power rails per site: VCP / VPP1 / VPP2
Max power per single site: 12.2W (Total power of VCP, VPP1 and VPP2 for one site)
Specifications for VCP & VPP1: Voltage range 0.8V ~ 3.6V, max current 1A
Supported Chip TypesUFS, eMMC, eMCP, MCU/MPU, FPGA, CPLD, Nand/Nor Flash, SPI-memory, EEPROM and other programmable chips
Programming Interface Types SupportedI2C, SPI, PMBus, JTAG, SWD, UART, BDM, Swire, HyperBus, Xccela, eMMC, UFS
Power ConsumptionPower consumption range: 20W minimum to 60W maximum
SizeSG8000V2-H:198X199X156mm
SG8000V2:116X165X35mm
Operating Voltage100-240VAC (50/60Hz)
Operating Temperature5~45℃
CertificationCE Certification

Hot tags:

烧录器| ic烧录机| IC自动烧录机| 芯片烧录设备| 自动化烧录器| 全自动ic烧录机| IC自动化烧录器| 万用型烧录器| IC自动烧写器| 在线自动化烧录机| ic芯片烧录机厂家| 芯片自动烧录器| 芯片自动烧录机| 自动编程烧录器| 全自动芯片烧写器| 全自动在线烧录机| 自动ic烧录机厂家| 自动化ic烧录机| 芯片烧录器厂家| 全自动在线烧录机|
memory ic programmer_Production Programmers_eMMC Programmer

Dear, scan to add WeChat as a friend