current location:Home>News>Industry News

Latest News

Contact Us

Address: 3F , Blg 7 West, Sinosteel Building,Maque Industry Village Nanshan,Shenzhen,518057,Guangdong

Phone: +86-755-26971006

Mobile: 13751075276


Acroview AP8000 universal programmer to Support 32-bit Microcontroller MM32F3273G9P for programming

Time:2023-05-18   Visits:1747

The leader of the chip programming industry - Angko Technology recently released the latest programming software update and a list of newly supported chip models. Among them, the 32-bit microcontroller MM32F3273G9P of MindMotion, a smart microelectronics device, has been supported by Angko's universal burning platform AP8000.

MM32F3273G9P adopts high-performance Arm ®  Cortex ®- M3 is a 32-bit microcontroller with a core, with a maximum operating frequency of 120MHz, built-in high-speed memory, rich I/O ports, and peripheral connections to external buses. The MM32F3273G9P includes up to 3 12 bit ADCs, 2 comparators, 2 16 bit universal timers, 2 32-bit universal timers, 2 16 bit basic timers, and 2 16 bit advanced timers. It also includes standard communication interfaces: 2 I2C interfaces, 3 I2S interfaces, 3 SPI interfaces, 1 USB OTG full speed interface, 1 CAN interface, 1 SDIO interface, and 8UART interface.

The operating voltage of MM32F3273G9P is 2.0V~5.5V, and the operating temperature range (ambient temperature) includes industrial models ranging from -40 ° C to 85 ° C and extended industrial models ranging from -40 ° C to 105 ° C (tail end V). It is equipped with multiple power-saving working modes to meet the requirements of low-power applications.

Application occasions:

• industrial internet of things equipment

• Alarm system, video intercom, and HVAC system

• Medical and handheld devices

• Motor drive and application control

• PC gaming peripherals and GPS platform

Programmable controllers (PLCs), frequency converters, printers, scanners, etc

universal device programmer


• Kernel and System

– Arm ®  Cortex ®- M3 32-bit microcontroller

- Standard operating frequency up to 96MHz

- Maximum operating frequency up to 120MHz

• Memory

Up to 512KB of Flash program memory

- Up to 128KB SRAM

Boot loader supports on chip Flash online system programming (ISP)

FSMC interface, supporting external expansion of SRAM/PSRAM/NOR Flash types, compatible with 8080/6800 communication bus mode

• Clock, reset, and power management

-2.0V~5.5V power supply

- Power on/power off reset (POR/PDR), programmable voltage monitor (PVD)

- External 4~24MHz high-speed crystal oscillator

- Embedded with factory calibrated 8MHz high-speed RC oscillator

- Supports multiple PLL and frequency division modes for USB clock sources

PLL supports CPU running up to 120MHz

- Embedded 40KHz low-speed oscillator

- External 32.768KHz low-speed oscillator

• Low power consumption

- Multiple low-power modes, including: Low Power Run, Sleep, Low Power Sleep, Stop, Deep Stop, and Standby modes

- VBAT supplies power to RTC and backup registers

Three 12 bit analog-to-digital converters with 1 us conversion time (up to 21 input channels and 3 internal input channels)

- Conversion range: 0~VDDA

- Supports sampling time and resolution configuration

On chip temperature sensor

On chip voltage sensor

- VBAT voltage sensor

• 2 DACs

• 2 analog comparators

2 DMA controllers with a total of 12 channels

Supported peripherals include Timer, ADC, DAC, UART, I2C, SPI, USB OTG

Up to 116 fast I/O ports:

Group A to Group G I/O ports can be mapped to 16 external interrupts (Group H I/O ports do not support external interrupts)

- All ports can input and output VDD signals

11 timers

- Two 16 bit 4-channel advanced control timers with 4-channel PWM output, as well as dead zone generation and emergency stop functions

-2 16 bit universal timers and 2 32 bit universal timers with up to 4 input capture/output comparisons for IR control decoding

-2 16 bit basic timers, with 1 input capture/output comparison and 1 set of complementary outputs, dead zone generation, emergency stop, modulator gate circuit for IR control

-2 watchdog timers (independent and window type)

-1 Systick timer: 24 bit self reducing counter

• Debug mode

- Serial debugging interface (SWD) and JTAG interface

universal eprom programmer

Internal block diagram

The AP8000 universal ic programmer machine independently developed by Angke Technology includes three parts: the host, the base plate, and the adapter seat.

ufs programmer

The host supports USB and NET connections, allowing multiple IC Programmers to be networked to achieve the purpose of simultaneously controlling multiple programmers to burn at the same time. The built-in chip safety protection circuit ensures that even if the chip is reversed or a short circuit caused by other reasons can be detected immediately and the power will be cut off to ensure the safety of the chip and programmer. Embedded high-speed FPGA greatly accelerates data transmission and processing. There is an SD card slot on the back of the main unit. Put the project file produced by the PC software into the root directory of the SD card and insert it into the card slot. The project file can be selected, loaded, and programmed through the buttons on the programmer. command, in order to achieve the purpose of operating without PC, which greatly reduces the cost of PC hardware configuration, and can be conveniently and quickly matched with the working environment.

AP8000 makes the mainframe more expandable by adding an adapter board to the backplane. Currently, it supports devices produced by all mainstream semiconductor manufacturers, including TI, ST, MicroChip, Atmel, Hynix, Macronix, Micron, Samsung, Toshiba, etc. Supported device types include NAND, NOR, MCU, CPLD, FPGA, EMMC, etc., and support file formats including Intel Hex, Motorola S, Binary, POF, etc.

Company Profile

About MindMotion Microelectronics: MindMotion Microelectronics was established in 2011 and is a local supplier of general 32-bit MCU products and solutions in China. The MCU products of Lingdong Microelectronics are labeled with MM32, based on the Arm Cortex-M series core, and independently developed software, hardware, and ecosystem. At present, more than 200 models have been mass-produced, with a total delivery of over 300 million units, ranking among the top domestic general-purpose 32-bit MCU companies. Our clients cover application fields such as intelligent industry, automotive electronics, communication infrastructure, healthcare, smart home appliances, the Internet of Things, personal devices, mobile phones, and computers. Lingdong Microelectronics is one of the few local MCU companies in China that has received official support from Arm-KEIL, IAR, and SEGGER, and has established an independent and complete universal MCU ecosystem. It can provide customers with various support from hardware chips to software algorithms, reference solutions to system design.

About ACROVIEW Technology: ACROVIEW is Global Leader of Semicondutor Automatic Programming Solutions. The company adheres to changing the world with technology, driving the future with intelligence, and continuously creating value for customers. Angko's AP8000 universal burner platform and the latest IPS5000 burner automation solution provide one-stop solutions for customers in the semiconductor and electronic manufacturing fields. The company has served leading global customers such as Huawei, BYD, and Foxconn.

Hot tags:

烧录器| ic烧录机| IC自动烧录机| 芯片烧录设备| 自动化烧录器| 全自动ic烧录机| IC自动化烧录器| 万用型烧录器| IC自动烧写器| 在线自动化烧录机| ic芯片烧录机厂家| 芯片自动烧录器| 芯片自动烧录机| 自动编程烧录器| 全自动芯片烧写器| 全自动在线烧录机| 自动ic烧录机厂家| 自动化ic烧录机| 芯片烧录器厂家| 全自动在线烧录机|
memory ic programmer_Production Programmers_eMMC Programmer

Dear, scan to add WeChat as a friend