Acroview, a leader in chip programming, has officially expanded its compatible device portfolio with the release of its latest programming software. Its core product, the universal programming platform AP8000, now fully supports the EMC6083 IoT module from MXCHIP.

The EMC6083 module is primarily used for IoT data communication. With rich peripheral interfaces, it enables data collection and device control. It can communicate directly with mobile devices via Bluetooth Low Energy (BLE) or connect to IoT cloud platforms through Wi-Fi, facilitating universal connectivity. With various form factors, interface types, antenna connectors, and temperature ranges, the EMC6083 is suitable for a wide range of IoT applications.

The EMC6083 module integrates a highly integrated Wi-Fi/BLE Combo SoC, providing the necessary computing power and stable Wi-Fi/BLE connectivity for IoT endpoints. The chip integrates:

• Dual processors (Arm Cortex-M55 and RISC-V)

• Clock speed up to 400MHz

• 768KB SRAM

• 8MB XIP Flash

• 8MB external Flash

• 2.4GHz Wi-Fi controller compliant with IEEE 802.11 b/g/n/ax standards

• BLE 5.2 compliant low-energy Bluetooth controller supporting SIG Mesh networking

The EMC6083 module is powered by a single 3.3V supply and supports SMT assembly with stamp holes, making it suitable for various smart home appliance applications.

Features

• Voltage input: 3.0V~3.6V

• Operating temperature: -40°C to +105°C

• Dual processors (Arm Cortex-M55 and RISC-V)

-- 32-bit processor

-- Clock speed up to 400MHz

-- UART for downloading and debugging

• Memory

-- 768KB SRAM

-- 64KB ROM

-- 8MB XIP Flash

-- 8MB external Flash

• Wi-Fi

-- IEEE 802.11 b/g/n/ax 1T1R

-- Supports 20MHz channel bandwidth, 2.4GHz single band

-- Tx power up to +18dBm, Rx sensitivity -99dBm

-- Supports STA, AP, Direct, and concurrent AP+STA modes

-- Supports WPA/WPA2/WPA3

-- Integrated BT/WLAN coexistence (PTA)

• Bluetooth

-- BLE 5.2 compliant low-energy Bluetooth

-- Supports Bluetooth mesh networking

-- Supports SIG Mesh network communication modes (flooding and routing)

-- Supports AoA and AoD technology

-- Wi-Fi and BLE share the same PA and antenna, time-division multiplexing

-- Supports BLE slave mode for BLE provisioning

• Rich Peripherals

-- 21x GPIO

-- 1x SPI

-- 3x UART

• Interface and Dimensions

-- IPEX connector for external antenna

-- 18x19.2x3.2mm, stamp holes

• Rich Software Support

-- Supports MXOS proprietary operating system

-- Provides SDKs for major cloud platforms and AT commands

-- Provides mass-production firmware for various typical applications

Applications

• Smart home appliances

• Smart electricals

• Industrial automation

Hardware Interface Block Diagram

Acroview's self-developed AP8000 universal programmer has become a benchmark professional programming solution in the industry. It supports flexible 1-to-1 and 1-to-8 configuration modes, offers both online and offline operation, and features dedicated programming solutions for memory chips like eMMC and UFS. It fully supports both offline bare-chip and onboard programming for the entire MXCHIP chip series. The AP8000 adopts a modular design of host, baseboard, and adapter socket, providing excellent compatibility and scalability. As a universal programming platform, it not only supports various programmable chips on the market but also serves as the core component of Acroview's automated batch programmer IPS5800S, efficiently handling large-scale programming tasks to meet mass production needs.

The AP8000 host features flexible connectivity with both USB and NET interfaces, enabling easy networking of multiple programmers. This networking capability allows users to synchronously control multiple programmers for efficient parallel programming. For safety, the host integrates intelligent protection circuits that monitor chip placement and connection status. If anomalies such as reverse insertion or short circuits are detected, it triggers an immediate power-off protection mechanism, ensuring the safety of both the chip and the programmer. The host is equipped with a high-speed FPGA chip, significantly improving data transfer and processing efficiency for smooth, high-speed programming. For enhanced convenience, an SD card slot is located on the back of the host. Users can save project files generated on a PC to an SD card, insert it into the slot, and perform file selection, loading, and programming via the programmer's physical buttons, enabling PC-independent operation. This design reduces reliance on computer hardware and simplifies the setup process, significantly improving operational flexibility.

In terms of scalability and compatibility, the AP8000 uses a modular combination of baseboard and adapter boards, effectively expanding the host's functionality. The device currently supports products from all major semiconductor manufacturers, including SK hynix, Micron, SANDISK, ASR, and Kingston. It supports a wide range of device types, including NAND, NOR, MCU, CPLD, FPGA, and eMMC, and is fully compatible with various industry-standard file formats such as Intel Hex, Motorola S, Binary, and POF, providing users with a one-stop, full-scenario chip programming solution.

Company Introduction

About MXCHIP: MXCHIP is a leading provider of intelligent IoT system solutions in China. By continuously building more reliable chip module hardware, more agile and intelligent cloud platforms, more user-friendly app services, and more powerful and open scenario capabilities, MXCHIP helps brand customers create intelligent products and scenarios, injecting sustained momentum into their digital transformation.

About Acroview: Acroview is a national "Little Giant" enterprise specializing in the R&D, production, and sales of semiconductor chip testing and programming equipment. The company is committed to empowering the entire industry chain, including Fabless, IDM, OSAT, wafer fabs, and end-device companies, through innovative semiconductor testing technologies and solutions. Acroview's pioneering Auto Burn-In (ABI) system significantly improves chip burn-in testing efficiency and reduces per-DUT testing costs. Acroview also provides equipment and solutions for various stages including PSV, CP, FT, ABI, SLT, and programming. The company perfectly integrates its leading product technology, system-level expertise, and globally distributed R&D and sales service networks to create value for customers in gaining a competitive edge.