current location:Home>News>Industry News

Latest News

Contact Us

Address: 3F , Blg 7 West, Sinosteel Building,Maque Industry Village Nanshan,Shenzhen,518057,Guangdong

Phone: +86-755-26971006

Mobile: 13751075276

Email: sales@acroview.com

Acroview Programmer Supports Nation’s High-Performance Microcontroller N32H473CEU

Time:2026-11-20   Visits:1018

As a leader in chip programming, Acroview has announced the further expansion of its compatible chip coverage while releasing a new version of its programming software. The company’s core product, the AP8000 universal programming platform, is now fully compatible with Nation’s high-performance microcontroller N32H473CEU.

The N32H473CEU adopts a 32-bit Arm® Cortex®-M4F core with a maximum operating frequency of 240MHz. It supports floating-point operations and DSP instructions, integrates up to 512KB embedded Flash, 512KB D-Flash (supported on selected models), and 196KB SRAM (including 32KB CCM SRAM + 4KB Backup SRAM). It also integrates 4 12-bit 4.7Msps ADCs, 8 12-bit DACs, 4 PGAs, and 7 COMPs, and supports communication interfaces such as USB FS Device, U(S)ART, I2C, SPI, and CAN-FD. The device supports the xSPI high-speed storage interface, FEMC storage interface, and I2S audio interface, as well as multiple advanced timers, general-purpose timers, basic timers, and low-power timers. It supports CORDIC and FMAC and has a built-in hardware acceleration engine for cryptographic algorithms.

N32H473CEU

Key Features

• Core CPU

  • Arm® Cortex®-M4F @ 240MHz + FPU, performance up to 300 DMIPS, single-cycle hardware multiply/divide instructions, supports DSP instructions and MPU, built-in 8KB instruction cache, and supports the Flash acceleration unit for zero-wait program execution

• Encrypted Memory

  • 512KB eFlash, supporting encrypted storage, partition management, and data protection; 10,000 erase/write cycles; 10-year data retention

  • 512KB D-Flash (only supported by N32H473CG), optionally supporting encrypted storage; 200,000 erase/write cycles

  • 196KB SRAM, supporting parity and ECC

• Power Consumption

  • Supports Run, Stop0, and Standby power modes

• Supports internal RC or external crystal clock input

• Reset

  • Supports power-on/power-down/external pin reset

  • Supports watchdog reset

  • Supports programmable voltage detection

  • Up to 107 GPIOs supported

• Communication Interfaces

  • 1 USB FS Device interface

  • 6 SPI interfaces, 2 I2S interfaces

  • 4 USART interfaces/4 UART interfaces, supporting 7816, IrDA, and LIN

  • 4 I2C interfaces

  • 2 CAN-FD bus interfaces

• High-Performance Analog Interfaces

  • 4 12-bit 4.7Msps ADCs, with up to 64 external channels

  • 8 12-bit DACs, with a maximum sampling rate of 15Msps

  • 4 high-performance PGAs, supporting differential and single-ended modes

  • 7 high-speed comparators (COMP)

• High-Speed Memory Expansion Interfaces

  • 1 xSPI interface

  • 1 FEMC interface

• CORDIC hardware accelerator for motor-control math functions

• Built-in FMAC filtering algorithm accelerator, supporting FIR and IIR filtering

• 2 high-speed DMA controllers with 16 channels

• Built-in calibratable RTC real-time clock, supporting leap-year perpetual calendar, alarm events, and periodic wake-up

• High-Precision Timers/Counters

  • 3 16-bit advanced timers, with 12 pairs of complementary PWM outputs and 5ns control accuracy

  • 10 16-bit general-purpose timers, supporting 40 PWM outputs

  • 2 32-bit basic timers

  • 2 16-bit low-power timers

  • 1 24-bit SysTick

  • 2 independent watchdog counters

• Security Features

  • Flash memory encryption and multi-user partition management (SMPU)

  • Supports write protection (WRP) and multiple read protection (RDP) levels (L0/L1/L2)

  • Built-in hardware acceleration engine for cryptographic algorithms, supporting AES, TDES, SHA, SM3, SM4, and MD5

  • TRNG true random number generator

  • CRC16/32 calculation

  • Supports secure boot, encrypted program download, and secure update

  • Supports external clock failure monitoring

  • Supports tamper detection

  • 96-bit UID and 128-bit UCID

• High-Reliability Operating Environment

  • 1.8V~3.6V/-40°C~105°C|125°C

  • ±4kV ESD (HBM)

  • ±4kV EFT (VDD Class A)

Applications

Mainly used in UPS, digital power supplies, energy storage, battery swap cabinets/charging piles, photovoltaic inverters, frequency converters, UAV ESCs, gimbals, servos, LiDAR, and other applications.

Internal Block Diagram

Internal Block Diagram

Acroview’s self-developed AP8000 universal programmer has become a benchmark professional programming solution in the industry. The device supports flexible one-to-one and one-to-eight configuration modes and provides both online and offline working modes. In particular, dedicated programming solutions have been developed for memory chips such as eMMC and UFS, fully covering the bare-chip offline programming and in-system programming requirements of Nation’s full chip series. The AP8000 adopts an innovative modular design with three core modules: main unit, bottom board, and adapter socket, giving the device excellent compatibility and expansion capability. As a universal programming platform, it can not only adapt to various programmable chips on the market, but also, with its stable and efficient performance, serves as a core component of Acroview’s automated batch programming equipment IPS5800S, efficiently handling large-scale chip programming tasks and meeting mass production requirements.

AP8000_Universal Programmer_Chip Programmer

The AP8000 main unit offers flexible connection options and is equipped with both USB and NET interfaces, enabling convenient networking of multiple programmers. Through the networking function, users can easily achieve synchronous control of multiple programmers and efficiently carry out parallel programming operations. In terms of safety, the main unit has a built-in intelligent safety protection circuit that monitors chip placement status and circuit connections in real time. Once abnormalities such as reversed chip insertion or short circuits are detected, the power-off protection mechanism is triggered immediately, comprehensively safeguarding the safe operation of chips and the programmer. The main unit is equipped with a high-speed FPGA chip, greatly improving data transmission and processing efficiency and ensuring a smooth and efficient programming process. To enhance ease of use, an SD card slot is provided on the back of the main unit. Users only need to save project files generated on a PC to an SD card and insert it into the slot, then complete file selection, loading, and programming operations through the programmer’s physical buttons, achieving standalone operation without a PC. This design not only reduces dependence on computer hardware configurations but also simplifies the setup of the working environment and significantly improves operational flexibility.

In terms of expandability and compatibility, the AP8000 adopts a modular combination design of bottom board and adapter board, effectively expanding the functional boundaries of the main unit. At present, the device supports products from all mainstream semiconductor manufacturers, covering well-known brands such as SK hynix, Micron, SANDISK, ASR, and Kingston. It supports a wide range of device types, including NAND, NOR, MCU, CPLD, FPGA, and eMMC, and is fully compatible with various industry-standard file formats such as Intel Hex, Motorola S, Binary, and POF, providing users with one-stop, full-scenario chip programming solutions.

Company Profiles

About Nation: Nation was founded in 2000 and originated from the national “909” integrated circuit special project. It is a leading enterprise in China’s security chips and general-purpose MCUs and a national-level high-tech enterprise. It has China’s first enterprise-independent security chip attack and defense technology laboratory and a postdoctoral research workstation. Its main products include security chips, general-purpose MCUs, trusted computing chips, smart card chips, contactless reader/writer chips, Bluetooth chips, RCC innovative products, and more. They are widely used in network security authentication, e-banking, electronic licenses, mobile payment and mobile security, IoT, industrial networking and industrial control, smart home appliances and smart home IoT terminals, consumer electronics, motor drives, battery and energy management, smart meters, medical electronics, automotive electronics, security, biometrics, communications, sensors, machine automation, and other application areas.

About Acroview: Acroview is a national-level specialized and sophisticated “little giant” enterprise engaged in the R&D, manufacturing, and sales of semiconductor chip testing and programming equipment. The company is committed to empowering customers across the entire industry chain, including Fabless, IDM, OSAT, wafer Fab, and end-device companies, through innovative semiconductor testing technologies and solutions. Acroview’s pioneering fully automatic burn-in (ABI) system greatly improves customers’ chip burn-in testing efficiency and reduces per-DUT test costs. It also provides equipment products and solutions for all stages from PSV, CP, FT, ABI, SLT, and programming. We perfectly integrate leading product technology advantages, system-level expertise, and a globally deployed R&D and sales service network to create value for customers to gain a leading position in market competition.

Hot tags:

烧录器| ic烧录机| IC自动烧录机| 芯片烧录设备| 自动化烧录器| 全自动ic烧录机| IC自动化烧录器| 万用型烧录器| IC自动烧写器| 在线自动化烧录机| ic芯片烧录机厂家| 芯片自动烧录器| 芯片自动烧录机| 自动编程烧录器| 全自动芯片烧写器| 全自动在线烧录机| 自动ic烧录机厂家| 自动化ic烧录机| 芯片烧录器厂家| 全自动在线烧录机|
memory ic programmer_Production Programmers_eMMC Programmer

Dear, scan to add WeChat as a friend