2026-11-20
2026-11-19
2026-11-17
2026-11-16
2026-11-11
2026-11-10
Address: 3F , Blg 7 West, Sinosteel Building,Maque Industry Village Nanshan,Shenzhen,518057,Guangdong
Phone: +86-755-26971006
Mobile: 13751075276
Email: sales@acroview.com
Along with the release of a new version of its programming software, Acroview, a leader in chip programming, officially announced further expansion of its compatible chip model coverage. Its core product, the universal programming platform AP8000, has now achieved full compatibility with Linkedsemi's low-power Bluetooth SoC LE5010A.
LE5010A is a low-power Bluetooth SoC launched by Linkedsemi Electronics. It belongs to the LE5010 series and supports BLE 5.0/5.1 protocols, SIG mesh, and private mesh. It integrates a 32-bit MCU with a maximum clock frequency of 64MHz, 512KB Flash and 64KB SRAM, and an operating temperature range of -40°C to +105°C. It is commonly used in smart wearables, IoT remote controls, smart home, and other scenarios.

Features
Bluetooth BLE5.0/BLE5.1
Supports 125Kbps/500Kbps/1Mbps/2Mbps
Receiver sensitivity: -99.7dBm@1Mbps
-97dBm@2Mbps
-105dBm@125kbps
Transmit power: +13dBm (max)
Link gain: 117dB@125kbps (max)
Supports single-ended antenna output
Power and reset
Main power domain (VDD33)
Operating voltage range: 1.8V ≤ VDD33 ≤ 3.6V
POR, BOR, LVD
System peripherals
DMA: supports 8 multiplexed channels
Watchdog timers: IWDG and WWDG
Peripheral interconnect PIS
System tick timer
MCU core
32-bit CPU core
Maximum frequency up to 64MHz
Maximum 64kB SRAM storage
Maximum 512kB Flash storage
Supports two-wire debug protocol
Timers
1 advanced 16-bit timer (ADTIM), supports 4 groups of PWM, of which 3 groups support dead-time complementary
1 general-purpose 32-bit timer A (GPTIMA), supports 4 PWM channels
1 general-purpose 16-bit timer B (GPTIMB), supports 4 PWM channels
1 general-purpose 16-bit timer C (GPTIMC), supports 2 groups of PWM, of which 1 group supports dead-time complementary
1 basic timer (BSTIM)
1 low-power timer (LPTIM)
General IO
Supports up to 20 general-purpose IOs
Bluetooth MESH
Supports Bluetooth SIG Mesh
Supports private MESH
System power consumption
RX mode: 4.5mA @3.3V
TX mode: 4.3mA @3.3V 0dBm
Deep sleep mode: 1.1uA (GPIO wake-up + RTC wake-up)
ShutDown mode: 700nA (GPIO wake-up)
Communication interfaces
2 I2C interfaces (support bus arbitration)
2 SPI interfaces
3 UARTs (can support ISO7816, LIN, IrDA, etc.)
Clocks
External high-speed crystal oscillator: 16MHz
Internal high-speed RC oscillator: 24MHz
External low-speed crystal oscillator: 32.768K
Internal low-speed RC oscillator: 32.768KHz
ADC
12-bit high-precision SAR ADC
Supports up to 9 external channels
Supports 3 internal channels
Built-in temperature sensor
1/8, 1/4, 1/2, 3/8 VDD
Internal 1.4V reference
Audio interfaces
2 PDM interfaces, support digital MIC
1 I2S interface
Applications
General Bluetooth products
Wearable applications
Smart buildings
Smart home
Smart mobility
Computer peripherals

Block Diagram
Acroview's self-developed AP8000 universal programmer has become a professional programming solution with benchmark significance in the industry. The device supports flexible one-to-one and one-to-eight configurations and provides both online and offline working modes. In particular, it has developed dedicated programming solutions for memory chips such as eMMC and UFS, fully covering the bare-chip offline programming and on-board programming requirements of Linkedsemi's full series of chips. AP8000 adopts an innovative modular design with three core modules: host, baseboard, and adapter socket, giving the device excellent compatibility and scalability. As a universal programming platform, it can not only adapt to various programmable chips on the market, but also, with stable and efficient performance, serves as the core component of Acroview's automated batch programming equipment IPS5800S, efficiently handling large-scale chip programming tasks and meeting mass production needs.

AP8000 host has flexible connection methods and is equipped with both USB and NET interfaces, enabling convenient networking of multiple programmers. Through the networking function, users can easily achieve synchronous control of multiple programmers and efficiently carry out parallel programming operations. In terms of security, the host has a built-in intelligent safety protection circuit that can monitor chip placement status and circuit connection conditions in real time. Once abnormalities such as reversed chip insertion or short circuits are detected, it will immediately trigger a power-off protection mechanism, comprehensively safeguarding the safe operation of chips and the programmer. The host is equipped with a high-speed FPGA chip inside, greatly improving data transmission and processing efficiency and ensuring a smooth and efficient programming process. To enhance ease of use, the back of the host is provided with an SD card slot. Users only need to store the project file generated on the PC to an SD card and insert it into the slot, then complete file selection, loading, and programming through the physical buttons of the programmer, enabling standalone operation without a PC. This design not only reduces dependence on computer hardware configuration but also simplifies the work environment setup process and significantly improves operational flexibility.
In terms of scalability and compatibility, AP8000 adopts a modular combination design of baseboard and adapter board, effectively expanding the functional boundaries of the host. At present, the device supports products from all mainstream semiconductor manufacturers, covering well-known brands such as SK hynix, Micron, SANDISK, ASR, Kingston, etc. Its supported device types are extensive, covering NAND, NOR, MCU, CPLD, FPGA, EMMC, etc., and fully compatible with various industry-standard file formats such as Intel Hex, Motorola S, Binary, POF, providing users with one-stop, full-scenario chip programming solutions.
Company Introduction
About Linkedsemi: Linkedsemi is a chip system design company with system solution capabilities, underlying software capabilities, chip design capabilities, independent R&D capabilities for core IP (MCU/BLE/RF/PMU/high-speed SerDes/high-precision AD/DA, etc.), and industrial, automotive, and specific process optimization capabilities. It has first-class R&D and market implementation strength and has accumulated important supply chain resources and operational plans. Based on MCU/Bluetooth SoC chips, Linkedsemi is gradually expanding toward computing and control platforms.
About Acroview: Acroview is a national-level specialized and sophisticated "little giant" enterprise engaged in the R&D, production, and sales of semiconductor chip testing and programming equipment. The company is committed to empowering customers across the entire industry chain, including Fabless, IDM, OSAT, wafer Fab, and terminal equipment enterprises, through innovative semiconductor testing technologies and solutions. Acroview's pioneering fully automated ABI (Auto Burn-In) system greatly improves customers' chip burn-in testing efficiency and reduces Per DUT testing costs. It also provides customers with equipment products and solutions covering PSV, CP, FT, ABI, SLT, programming, and other stages. We perfectly integrate the leading advantages of product technology, system-level professional knowledge, and a globally deployed R&D and sales service network to create value for customers to gain leadership in market competition.
Last article:昂科烧录器支持linkedsemi凌思微的低功耗蓝牙SoC芯片LE5010A
Next article:昂科烧录器支持SinoWealth中颖电子的8位微控制器SH79F9270P
Dear, scan to add WeChat as a friend
Online Service
Phone

Top